Satin matt finish for exterior clear oil.Based on natural vegetable oils – this reduces greying (and yellowing) when compared with untreated wood. The micro porous wood stain will not crack, flake, peel or blister.It is water repellent and moisture regulating and reduces swelling and shrinking of the wood. SAICOS UV PROTECTIVE WOOD FINISH EXTERIOR is easy to apply and easy to maintainNatural Oil Base:SAICOS UV PROTECTIVE WOOD FINISH EXTERIOR is based on natural vegetable oils. The natural raw materials penetrate into the wood, keeping it sound and elastic and avoid the wood from becoming dry. Allows the wood to breathe therefore the moisture can evaporate and shrinking and swelling will be reduced.FIELDS OF APPLICATION:Can be applied on all exterior wood which is to be left “natural“, ie: wood panelling, undersides of roofs, wooden garden furniture, summer houses, outside windows and doors, fencing etc.As full finish – 2 coats:1101 colourless on wood surface which will leave the wood looking natural.APPLICATION PROCEDURE:Preparation: Wood surface must be clean and dry (max. moisture content 18 %). Clean old microporous finishes if in good condition. Remove old varnishes. Apply on frost-free wood only (working temperature not lower than 5° C).Application:SAICOS UV PROTECTIVE WOOD FINISH EXTERIOR is ready to use, do not thin, stir well. Apply with a flat brush (SAICOS flat brush with pure bristles) thinly and evenly on a clean and dry surface along the wood grain.Drying time:Approx. 6 – 8 hrs. (depending on air temperature and humidity). Dust dry after approx. 4 hrs. A second coat can be applied after complete drying.BEST TEMPERATURE FOR APPLICATION:Between 5° C and 35° C. Apply on frost-free wood only.EASY MAINTENANCE:Wood treated with SAICOS UV PROTECTIVE WOOD FINISH EXTERIOR as a rule does not require any specified maintenance. For freshening up, no sanding will be required, apply a fresh coat on the cleaned and dry surface.