Clean Pro Heavy Duty Cleaner Degreaser H1

Description Professional hygiene systems. Tough on grease and carbon deposits. For use on heavily soiled areas. Suitable for floors, cookers, canopies and rotisseries. Clean Pro Plus Heavy Duty Cleaner Degreaser contains amongst other ingredients: Greater than 5% but less than 15%, EDTA and Salts thereof, Less than 5% Non-Ionic Surfactants, Anionic Surfactants, Amphoteric Surfactants, Phosphonates Directions for Use To clean heavily soiled areas on floors, cookers, canopies and rotisseries. To Dispense Product: Loosen but do not remove cap from dispenser bottle. Squeeze bottle to fill dosing reservoir to required level. Remove cap and pour liquid into required container. Keep transfer tube on dispenser bottle uppermost whilst pouring. Repeat until required amount of concentrate is dispensed. Ensure cap on dispenser bottle is tightened after use. Dilution: For General Cleaning: (floors, tiles etc.) Use 90ml of Heavy Duty Cleaner Degreaser per 5 litres of warm water. In Trigger Spray: (Ovens, canopies etc.) Fill trigger bottle to fill line with warm water and add 30-90ml of Heavy Duty Cleaner Degreaser from doser bottle. Application: In Sink or Bucket: Add Heavy Duty Cleaner Degreaser to warm water. Wash, mop or scrub area clean. Increased contact time aids grease removal. Rub vigorously to remove grease and dirt. Rinse thoroughly and allow to dry. By Spray: Carefully spray a small amount of diluted Heavy Duty Cleaner Degreaser to the warm area. Allow to stand for at least 5 minutes. Wipe/scrub with a cloth or brush to remove grease and dirt. Repeat as required for heavy soiling. Rinse thoroughly and allow to dry. When diluted this bottle makes up to: 11 x 5 litre buckets or 33 x 750ml trigger bottles
Category:

Hazardous Materials
Class 3: Flammable Substances

Flammable Storage Cabinet Features

  • 100Lt Cabinet Code SC100
  • 2 doors, 1 shelf
  • Under bench storage
  • viventura patented automated/sequential closing and self-locking mechanisms – unique with only one moving part
  • Double walled thermal barrier
  • Alloy contact points – no spark risk
  • Corner underside levelling bolts
  • For added protection, additional undercoat etch is used before high gloss powder coat finish
  • Key lock door handles and three-point latch locking
  • Doors open 180 degrees for easy shelf removal
  • Optional earthing point and cable provided
  • Dual side vents
  • Adjustable shelf height
  • Built to comply with Australian Standards 1940
  • Weight 100kg
  • External measurements H800 x W1100 x D500
Skip to content